Efeitos do laser de baixa intensidade em osteoblastos cultivados em arcabouços nanofibrosos de ácido polilático / Effects of low-intensity laser on osteoblasts cultured on polylactic acid nanofibrous scaffolds

A engenharia de tecidos ósseos é um ramo importante da medicina regenerativa e envolve o desenvolvimento de arcabouços com composição e arquitetura favoráveis à integração celular, além do estudo de fatores capazes de promover a adesão e proliferação celular, incluindo estímulos químicos e biofísicos. O objetivo do estudo foi avaliar a utilização do laser de baixa intensidade (LBI) como uma ferramenta para promover a bioestimulação in vitro de células osteoblásticas cultivadas em arcabouços nanofibrosos de ácido polilático (PLA). Os arcabouços foram produzidos pela técnica de eletrofiação e caracterizados quanto à molhabilidade, composição pela espectroscopia no infravermelho por transformada de Fourier (FTIR), morfologia da superfície por microscópica eletrônica de varredura (MEV), caracterização termogravimétrica (TGA), calorimetria diferencial exploratória (DSC) e cristalinidade por difração de raios-X (DRX). Os ensaios biológicos foram conduzidos com osteoblastos da linhagem OFCOL II cultivados na superfície dos arcabouços e submetidos ou não (grupo controle) a irradiação com laser diodo InGaAIP na potência de 30 mW, nas doses de 1, 4 e 6 J/cm² e nos comprimentos de onda de 660 nm (grupos V1, V4, V6, respectivo as doses) e 780 nm (grupos I1, I4 e I6, respectivo as doses). Os efeitos do LBI na proliferação dos osteoblastos foram avaliados através do método bioquímico Alamar Blue, nos intervalos de 24, 48 e 72h, enquanto a viabilidade e a morfologia celular foram analisadas no intervalo de 72h, através do ensaio Live/Dead e da microscopia eletrônica de varredura (MEV), respectivamente. Os dados do ensaio bioquímico de Alamar Blue mostraram uma maior proliferação celular nos grupos V6 em todos os intervalos analíticos em comparação ao grupo controle (p<0,05). Outras diferenças entre o grupo controle e irradiados foram encontradas apenas nos intervalos de 48h e 72h para V1, e para o grupo IV6 em 72h. O ensaio Live/Dead revelou um aumento na viabilidade celular nos grupos trados com LBI, sendo significativamente maior no grupo V1 quando comparado ao grupo controle. A análise por MEV mostrou adequada interação dos osteoblastos aos arcabouços, com o corpo celular se espalhando ao longo do eixo da nanofibra e a presença de contatos físicos mais evidentes, através da formação de ligação por meio de filopódios e lamelipódios, nos grupos V1, V6 e I6. Em conjunto, os dados do presente trabalho mostraram que o LBI promove a bioestimulação de osteoblastos cultivados sobre nanofibras de PLA, o que aponta para o seu uso potencial nas técnicas de engenharia tecidual óssea, sobretudo no que se refere ao uso do comprimento de onda de 660 nm, a qual apresentou grupos com mais resultados significativos (AU).

Bone tissue engineering is a relevant branch of regenerative medicine and involves the development of scaffolds with composition and architecture favorable to cell integration, in addition to studying factors capable of promoting cell adhesion and proliferation, including chemical and biophysical stimuli. The study aimed to evaluate the use of low-level laser irradiation (LLLI) to promote in vitro biostimulation of osteoblastic cells cultured on polylactic acid (PLA) nanofibrous scaffolds. The scaffolds were produced by the electrospinning technique and characterized in terms of wettability, composition by Fourier transform infrared spectroscopy (FTIR), surface morphology by scanning electron microscopy (SEM), thermogravimetric characterization (TGA), differential scanning calorimetry (DSC) and crystallinity by Xray diffraction (XRD). The biological assays were conducted with osteoblasts of the OFCOL II lineage cultured on the surface of the scaffolds and submitted or not (control group) to irradiation with InGaAIP diode laser, power of 30 mW, with doses of 1, 4 and 6 J/cm² and wavelengths of 660 nm (groups V1, V4, V6, respectively doses) and 780 nm (groups I1, I4 and I6, respectively doses). The effects of LLLT from the perspective of osteoblasts were evaluated using the biochemical method Alamar Blue assay, at intervals of 24, 48 and 72h, while cell viability and morphology were observed at 72h, using the Live/Dead assay and electron microscopy. scan (SEM), respectively. The Alamar Blue assay data showed more significant cell proliferation in groups in the V6 groups at all analytical intervals compared to the control group (p<0.05). Other differences between the control and irradiated groups were found only at intervals of 48h and 72h for V1, and for group IV6 at 72h. The Live/Dead assay revealed an increase in cell viability in the groups treated with LLLT, being significantly higher in the V1 group when compared to the control group. SEM analysis showed adequate interaction between osteoblasts and scaffolds, with the cell body spreading along the nanofiber axis and the presence of more evident physical contacts, through the formation of bonds through filopodia and lamellipodia, in groups V1, V6 and I6. Together, the data from the present study observed that LLLT promotes the biostimulation of osteoblasts cultured on PLA nanofibers, which pointed to its potential use in bone tissue engineering techniques, especially with regard to the use of the wavelength of 660 nm, which presented groups with more significant results (AU).

Micro-Fourier-transform infrared reflectance spectroscopy as tool for probing IgG glycosylation in COVID-19 patients.

It has been reported that patients diagnosed with COVID-19 become critically ill primarily around the time of activation of the adaptive immune response. However the role of antibodies in the worsening of disease is not obvious. Higher titers of anti-spike immunoglobulin IgG1 associated with low fucosylation of the antibody Fc tail have been associated to excessive inflammatory response. In contrast it has been also reported that NP-, S-, RBD- specific IgA, IgG, and IgM are not associated with SARS-CoV-2 viral load, indicating that there is no obvious correlation between antibody response and viral antigen detection. In the present work the micro-Fourier-transform infrared reflectance spectroscopy (micro-FTIR) was employed to investigate blood serum samples of healthy and COVID-19-ill (mild or oligosymptomatic) individuals (82 healthcare workers volunteers in "Instituto de Infectologia Emilio Ribas", São Paulo, Brazil). The molecular-level-sensitive, multiplexing quantitative and qualitative FTIR data probed on 1 µL of dried biofluid was compared to signal-to-cutoff index of chemiluminescent immunoassays CLIA and ELISA (IgG antibodies against SARS-CoV-2). Our main result indicated that 1702-1785 [Formula: see text] spectral window (carbonyl C=O vibration) is a spectral marker of the degree of IgG glycosylation, allowing to probe distinctive sub-populations of COVID-19 patients, depending on their degree of severity. The specificity was 87.5 % while the detection rate of true positive was 100%. The computed area under the receiver operating curve was equivalent to CLIA, ELISA and other ATR-FTIR methods ([Formula: see text]). In summary, overall discrimination of healthy and COVID-19 individuals and severity prediction as well could be potentially implemented using micro-FTIR reflectance spectroscopy on blood serum samples. Considering the minimal and reagent-free sample preparation procedures combined to fast (few minutes) outcome of FTIR we can state that this technology is suitable for fast screening of immune response of individuals with COVID-19. It would be an important tool in prospective studies, helping investigate the physiology of the asymptomatic, oligosymptomatic, or severe individuals and measure the extension of infection dissemination in patients.

Multitechnique diagnostic analysis and 3D surveying prior to the restoration of St. Michael defeating Evil painting by Mattia Preti.

In this study, a multimethodological analysis involving optical and physical/chemical diagnostic techniques and 3D photogrammetric survey was successfully applied, for the first time, on the large oil on canvas St. Michael defeating Evil painting by Mattia Preti, located inside the Church of the Immaculate Conception of Sarria (Floriana) in Malta. Pigmenting agents, binder media, and raw materials were first characterized, both at elemental and molecular scales, through X-ray fluorescence spectroscopy (XRF), optical stereo microscopy (SM), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared spectroscopy (FT-IR), and gas chromatography coupled with mass spectrometry (GC-MS). The main goal was to properly identify the execution technique of this famous painter, the artist's palette, and possible nondocumented interventions. The 3D photogrammetric survey, on the other side, allowed us to noninvasively evaluate the extension of the areas that experienced restorations, and to properly map the domains of the different canvasses observed. The joints between canvasses suggested that the painting was folded and rolled up. In addition, the employment of a thermal camera gave evidence of the different consolidating material injection points used during the restoration to strengthen the painting. The obtained results offer useful information for the development of optimized restoration and conservation strategies to be applied and provide, at the same time, answers to open questions related to provenance and dating of the investigated artwork.

Fourier transform and grating-based spectroscopy with a mid-infrared supercontinuum source for trace gas detection in fruit quality monitoring.

We present a multi-species trace gas sensor based on a fast, compact home-built Fourier transform spectrometer (FTS) combined with a broadband mid-infrared supercontinuum (SC) source. The spectrometer covers the spectral bandwidth of the SC source (2 - 4 µm) and provides a best spectral resolution of 1 GHz in 6 seconds. It has a detection sensitivity of a few hundred of ppbv Hz-1/2 for different gas species. We study the performance of the developed spectrometer in terms of precision, linearity, long-term stability, and multi-species detection. We use the spectrometer for measuring fruit-produced volatiles under different atmospheric conditions and compare the performance with a previously developed scanning grating-based spectrometer.

Characteristics of Starch Extracted from the Stem of Pineapple Plant (Ananas comosus) - an Agro Waste from Pineapple Farms

Abstract The present study focused on the use of pineapple plant stem, which is an agro-waste, for the production of starch (11.08 % ± 0.77). Characters were studied using X-ray diffraction, nuclear magnetic resonance spectroscopy (NMR), fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and rheological methods. The granular size of stem starch was comparatively smaller than corn starch granules. The X-ray diffraction data revealed that stem starch has an A-type crystal structure. The molecular structure was similar to those obtained for native starches, which is confirmed by NMR and FTIR. The gelatinization temperature was observed to be higher than corn starch and rheological studies revealed; stem starch is more viscous than corn starch. The purity analysis showed that the harmful heavy metals were in negligible quantity and the tested pesticides were absent. This could make this a good source of starch for food industries. Results revealed that this agro-waste has a high potential for the production of good quality starch.

Monitoring the Progression of Liver Fluke-Induced Cholangiocarcinoma in a Hamster Model Using Synchrotron FTIR Microspectroscopy and Focal Plane Array Infrared Imaging.

Cholangiocarcinoma (CCA) is a bile duct cancer that originates in the bile duct epithelium. Northeastern Thailand has the highest incidence of CCA, and there is a direct correlation with liver fluke (Opisthorchis viverrini) infection. The high mortality rate of CCA is a consequence of delayed diagnosis. Fourier transform infrared (FTIR) spectroscopy is a powerful technique that detects the absorbance of molecular vibrations and is perfectly suited for the interrogation of biological samples. In this study, we applied synchrotron radiation-FTIR (SR-FTIR) microspectroscopy and focal plane array (FPA-FTIR) microspectroscopy to characterize periductal fibrosis and bile duct cells progressing to CCA induced by inoculating O. viverrini metacercariae into hamsters. SR-FTIR and FPA-FTIR measurements were performed in liver sections harvested from 1-, 2-, 3-, and 6-month post-infected hamsters compared to uninfected liver tissues. Principal component analysis (PCA) of the tissue samples showed a clear discrimination among uninfected and early-stage (1 and 2 months) and cancerous-stage (3 and 6 months) tissues. The discrimination is based on intensity changes in the phosphodiester band (1081 cm-1), amino acid residue (∼1396 cm-1), and C═O stretching carboxylic esters (1745 cm-1). Infected tissues also show definitive bands at ∼1280, 1234, and 1201 cm-1 characteristic of the collagen triplet and indicative of fibrosis. Hierarchical cluster analysis (HCA) was performed on the FPA data and showed a classification into specific cell types. Hepatocyte, fibrotic lesion, and bile duct (cancer) were classified and HCA mapping showed similar cellular distribution pattern compared to Sirius red staining. This study was also extended to less invasive sample analysis using attenuated total reflectance-FTIR (ATR-FTIR) spectroscopy. Sera from O. viverrini-infected and uninfected hamsters were analyzed using multivariate analysis, including principal component analysis (PCA), and partial least squares-discriminant analysis (PLS-DA). PCA was able to classify spectra of normal, early-stage CCA, and CCA, while the PLS-DA gave 100% accuracy for the validation. The model was established from 17 samples (11 normal, 6 cancer) in the calibration set and 9 samples in the validation set (4 normal, 2 cancer, 3 precancerous). These results indicate that FTIR-based technology is a potential tool to detect the progression of CCA, especially in the early stages of the disease.

Synchrotron FTIR microspectroscopy revealed apoptosis-induced biomolecular changes of cholangiocarcinoma cells treated with ursolic acid.

BACKGROUND: Ursolic acid (UA) is a natural triterpenoid which possesses anti-cancer activity. However, little is known regarding the activity and molecular mechanism of UA in cholangiocarcinoma (CCA). Thus, we investigated the effects of UA on growth inhibition and apoptosis induction through biomolecular changes in KKU-213 and KKU-055 CCA cell lines. METHODS: The anti-proliferative effect of UA against CCA cells was evaluated using SRB assay. Changes in biomolecules were assessed by SR-FTIR microspectroscopy combined with PCA and conventional methods (i.e., Annexin V-FITC/PI staining for lipid alteration and apoptosis induction; Western blot analysis and caspase-3/7 activity assay for apoptotic protein detection). RESULTS: UA suppressed the proliferation of CCA cells in a dose- and time-dependent manner. SR-FTIR data revealed a significant alteration in lipids attributable to changes in apoptotic cell membranes, confirmed by Annexin V-FITC/PI staining. SR-FTIR data showed that UA promoted changes in the protein secondary structure. Elevated expression of Bax and decreased expression of Bcl-2 and survivin/BIRC5 along with augmented caspase-3/7 activity supported alterations in apoptosis-related proteins. CONCLUSIONS: SR-FTIR microspectroscopy was successfully used as a label-free technique to monitor apoptosis-induced biomolecular changes in UA-treated CCA cells. UA exerted the cytotoxic and apoptotic activities in CCA cells through alterations in membrane lipids and apoptotic proteins. UA could be a potential anti-CCA candidate and a chemical starting point for the discovery of novel anti-cancer agents. SIGNIFICANCE: Our present study showed the first evidence that UA exhibited the anti-proliferative and pro-apoptotic activities toward CCA cells through changes in biomolecules, notably lipids and proteins.

NIR Sensitizer Operating under Long Wavelength (1064 nm) for Free Radical Photopolymerization Processes.

Free radical polymerization upon near-infrared (NIR) light is still the subject of intense research efforts and remains a huge challenge particularly for long wavelengths (>1000 nm). In this study, a NIR sensitizer operating upon long wavelength (1064 nm) is proposed for an efficient polymerization of acrylate monomers. A new three-component photoinitiating system is developed comprising the NIR sensitizer in combination with an Iodonium salt (Iod) and an amine. Remarkably, the NIR sensitizer (IR 1064) absorbing strongly in all the near infrared region (700-1200 nm) offers the possibility to use a broad range of irradiation wavelengths, i.e., examples are provided at 785 and 1064 nm. Such long wavelengths are characterized by many advantages such as a deeper penetration of light and therefore a better curing of the monomer but it is also much safer than UV light. Excellent performance is observed for the three-component IR 1064/Iod/Amine system under air: high conversion of acrylate functions associated with a fast polymerization time. The use of IR 1064 as NIR sensitizer with a broad NIR absorption is-to the best of current knowledge-never proposed in the literature. The photoinitiating performances are studied using real-time Fourier transform infrared spectroscopy.

Phenotyping Plant Cellular and Tissue Level Responses to Cold with Synchrotron-Based Fourier-Transform Infrared Spectroscopy and X-Ray Computed Tomography.

Despite the extensive use of synchrotron radiation in material and biomedical sciences, it has only recently been utilized to expand our understanding of plant responses to environmental stress. Recent advances have led to the development of phenotyping platforms to identify chemical and morphological differences in breeding plant material. While these methodologies are applicable for and tested with a variety of abiotic and biotic stresses, they are particularly useful as a first step to identify cold-induced chemical and morphological changes in plants. Here, we describe two methods to determine cold acclimation-induced changes at the cellular and tissue levels. First, we illustrate how to quantify and visualize changes in tissue chemistry using Fourier-transform infrared spectroscopy. Second, we describe how to nondestructively prepare, analyze, and interpret X-ray phase contrast images and render this data as two- or three-dimensional models. While these techniques utilize synchrotron radiation, the methodology and standard practices are applicable for handheld and laboratory bench-top equipment operating with conventional light sources.

From Mouse to Human: Comparative Analysis between Grey and White Matter by Synchrotron-Fourier Transformed Infrared Microspectroscopy.

Fourier Transform Infrared microspectroscopy (µFTIR) is a very useful method to analyze the biochemical properties of biological samples in situ. Many diseases affecting the central nervous system (CNS) have been studied using this method, to elucidate alterations in lipid oxidation or protein aggregation, among others. In this work, we describe in detail the characteristics between grey matter (GM) and white matter (WM) areas of the human brain by µFTIR, and we compare them with the mouse brain (strain C57BL/6), the most used animal model in neurological disorders. Our results show a clear different infrared profile between brain areas in the lipid region of both species. After applying a second derivative in the data, we established a 1.5 threshold value for the lipid/protein ratio to discriminate between GM and WM areas in non-pathological conditions. Furthermore, we demonstrated intrinsic differences of lipids and proteins by cerebral area. Lipids from GM present higher C=CH, C=O and CH3 functional groups compared to WM in humans and mice. Regarding proteins, GM present lower Amide II amounts and higher intramolecular ß-sheet structure amounts with respect to WM in both species. However, the presence of intermolecular ß-sheet structures, which is related to ß-aggregation, was only observed in the GM of some human individuals. The present study defines the relevant biochemical properties of non-pathological human and mouse brains by µFTIR as a benchmark for future studies involving CNS pathological samples.

Experimental characterization of a biosensor based on a tapered optical fiber for kisspeptin detection.

This paper presents the development of a biosensor based on optical fiber, using a polyclonal antibody kisspeptin receptor as a biological recognition element that is connected to puberty onset and may also help to suppress metastasis in melanoma breast cancer. The fiber surface was chemically prepared to immobilize the antibody. The structural homogeneity of the biosensor, at each stage of the self-assembly, was characterized by Fourier transform infrared spectroscopy and by measurements of the transmission at the output of the biosensor. The morphological homogeneity analysis was performed by optical microscopy and scanning electron microscopy. The biosensor developed was checked to detect kisspeptin in brain tissues by spectral transmission using a superluminescent diode. The data were analyzed using principal component analysis. The interaction of the kisspeptin with its counterpart by means of the evolution of the transmission spectrum as a function of time was observed.

Gallium arsenide waveguides as a platform for direct mid-infrared vibrational spectroscopy.

During recent years, mid-infrared (MIR) spectroscopy has matured into a versatile and powerful sensing tool for a wide variety of analytical sensing tasks. Attenuated total reflection (ATR) techniques have gained increased interest due to their potential to perform non-destructive sensing tasks close to real time. In ATR, the essential component is the sampling interface, i.e., the ATR waveguide and its material properties interfacing the sample with the evanescent field ensuring efficient photon-molecule interaction. Gallium arsenide (GaAs) is a versatile alternative material vs. commonly used ATR waveguide materials including but not limited to silicon, zinc selenide, and diamond. GaAs-based internal reflection elements (IREs) are a new generation of semiconductor-based waveguides and are herein used for the first time in direct spectroscopic applications combined with conventional Fourier transform infrared (FT-IR) spectroscopy. Next to the characterization of the ATR waveguide, exemplary surface reactions were monitored, and trace-level analyte detection via signal amplification taking advantage of surface-enhanced infrared absorption (SEIRA) effects was demonstrated. As an example of real-world relevance, the mycotoxin aflatoxin B1 (AFB1) was used as a model analyte in food and feed safety analysis. Graphical abstract.

Modified Potentiometric Screen-Printed Electrodes Based on Imprinting Character for Sodium Deoxycholate Determination.

Potentiometric sensors have a great influence on the determination of most various compounds in their matrices. Therefore, efficient and new sensors were introduced to measure sodium Deoxycholate (NaDC) as a bile acid salt. These sensors are based on NaDC imprinted polymer (MIP) as sensory element. The MIP beads were synthesized using thermal polymerization pathway, in which acrylamide (AAm), ethylene glycol dimethacrylate (EGDMA), NaDC, and benzoyl peroxide (BPO) were used as the functional monomer, cross-linker, template, and initiator, respectively. The proposed sensors were fabricated using a coated screen-printed platform and the sensing membrane was modified by single-walled carbon nanotubes (SWCNTs) as an ion-to-electron transducer. The sensors exhibited high sensitivity that reached 4.7 × 10-5 M of near-Nernestian slope (-60.1 ± 0.9 mV/decade, r2 = 0.999 (n= 5)). In addition, the sensors revealed high selectivity, long lifetime, high potential stability, and conductivity that ensure reproducible and accurate results over a long time. MIP characterization was performed using Fourier Transform-Infrared (FT-IR) and a scanning electron microscope (SEM). Regarding the interaction of NaDC with serum albumin (SA), albumin is determined in human serum samples as human serum albumin (HSA), which was collected from different volunteers of different ages and gender.

Transmission Fourier Transform Infrared Spectroscopic Imaging, Mapping, and Synchrotron Scanning Microscopy with Zinc Sulfide Hemispheres on Living Mammalian Cells at Sub-Cellular Resolution.

Fourier transform infrared (FT-IR) spectroscopic imaging and microscopy of single living cells are established label-free technique for the study of cell biology. The constant driver to improve the spatial resolution of the technique is due to the diffraction limit given by infrared (IR) wavelength making subcellular study challenging. Recently, we have reported, with the use of a prototype zinc sulfide (ZnS) transmission cell made of two hemispheres, that the spatial resolution is improved by the factor of the refractive index of ZnS, achieving a λ/2.7 spatial resolution using the synchrotron-IR microscopy with a 36× objective with numerical aperture of 0.5. To refine and to demonstrate that the ZnS hemisphere transmission device can be translated to standard bench-top FT-IR imaging systems, we have, in this work, modified the device to achieve a more precise path length, which has improved the spectral quality of the living cells, and showed for the first time that the device can be applied to study live cells with three different bench-top FT-IR imaging systems. We applied focal plane array (FPA) imaging, linear array, and a synchrotron radiation single-point scanning method and demonstrated that in all cases, subcellular details of individual living cells can be obtained. Results have shown that imaging with the FPA detector can measure the largest area in a given time, while measurements from the scanning methods produced a smoother image. Synchrotron radiation single-point mapping produced the best quality image and has the flexibility to introduce over sampling to produce images of cells with great details, but it is time consuming in scanning mode. In summary, this work has demonstrated that the ZnS hemispheres can be applied in all three spectroscopic approaches to improve the spatial resolution without any modification to the existing microscopes.

Attenuated total reflection Fourier transform infrared as a primary screening method for cancer in canine serum.

Cancer is a major cause of death in dogs worldwide, and the incidence of cancer in dogs is increasing. The attenuated total reflection Fourier transform infrared spectroscopic (ATR-FTIR) technique is a powerful tool for the diagnosis of several diseases. This method enables samples to be examined directly without pre-preparation. In this study, we evaluated the diagnostic value of ATR-FTIR for the detection of cancer in dogs. Cancer-bearing dogs (n = 30) diagnosed by pathologists and clinically healthy dogs (n = 40) were enrolled in this study. Peripheral blood was collected for clinicopathological diagnosis. ATR-FTIR spectra were acquired, and principal component analysis was performed on the full wave number spectra (4,000-650 cm-1). The leave-one-out cross validation technique and partial least squares regression analysis were used to predict normal and cancer spectra. Red blood cell counts, hemoglobin levels and white blood cell counts were significantly lower in cancer-bearing dogs than in clinically healthy dogs (p < 0.01, p < 0.01 and p = 0.03, respectively). ATR-FTIR spectra showed significant differences between the clinically healthy and cancer-bearing groups. This finding demonstrates that ATR-FTIR can be applied as a screening technique to distinguish between cancer-bearing dogs and healthy dogs.

Monitoring the Kinetics of the Cellular Uptake of a Metal Carbonyl Conjugated with a Lipidic Moiety in Living Cells Using Synchrotron Infrared Spectromicroscopy.

Presented here is the exploitation of synchrotron infrared spectromicroscopy to evaluate the feasibility of monitoring the cellular uptake of rhenium-tris-carbonyl-tagged (Re(CO)3) lipophilic chains in living cells. To this aim, an in-house thermostated microfluidic device was used to limit water absorption while keeping cells alive. Indeed, cells showed a high survival rate in the microfluidic device over the course of the experiment, proving the short-term biocompatibility of the device. We recorded spectra of single, living, fully hydrated breast cancer MDA-MB231 cells and could follow the penetration of the rhenium complexes for up to 2 h. Despite the strong variations observed in the uptake kinetics between individual cells, the Re(CO)3 complex was traced inside the cells at low concentration and shown to enter them on the hour time scale by active transport.

Different Molarities and Dissolution-Precipitation Duration Affect the Formation of Carbonate-Apatite Blocks for Bone Graft Material

Abstract Objective: To determine diametral tensile strength and water absorption ability of Carbonate-apatite blocks fabricated from gypsum precursors (CaSO4) through a dissolution-precipitation method, with different solution molarities and immersion times. Material and Methods: Thirty-six CaSO4 gypsum specimens with 6 mm diameter; 3 mm height (Group A for diametral tensile strength) and 36 specimens of 6 mm diameter; 3 mm thickness (Group B for water absorption ability) were used. Each group was divided into 4 group treatments of: 1) dissolution-precipitation in solution of 0.5mol / L Na2CO3 + 0.5mol / L Na3PO4 for 48 hours and 72 hours; 1mol / L Na2CO3 + 1mol / L Na3PO4 for 48 hours and 72 hours. The C-Ap blocks were then tested using ATR-FTIR spectrometer to identify the formation of C-Ap functional groups. Furthermore, Group A specimens were tested for diametral tensile strength using Universal Testing Machine, and Group B specimens were tested for water adsorption ability using an analytical balance by measuring initial and final weight after immersion in saline solution at 37oC for 24 hours. Results: The formation of carbonate-apatite (C-Ap) in groups with solution molarity of 1 mol/L for 48 hours and 72 hours resulted in a lower diametral tensile strength and water absorption ability than the groups with a 0.5 mol/L solution. Conclusion: Solution with different molarities and dissolution-precipitation duration affect the formation of carbonate-apatite blocks.

Is Infrared Spectroscopy Ready for the Clinic?

Fourier transform-infrared spectroscopy (FT-IR) represents an attractive molecular diagnostic modality for translation to the clinic, where comprehensive chemical profiling of biological samples may revolutionize a myriad of pathways in clinical settings. Principally, FT-IR provides a rapid, cost-effective platform to obtain a molecular fingerprint of clinical samples based on vibrational transitions of chemical bonds upon interaction with infrared light. To date, considerable research activities have demonstrated competitive to superior performance of FT-IR strategies in comparison to conventional techniques, with particular promise for earlier, accessible disease diagnostics, thereby improving patient outcomes. However, amidst the changing healthcare landscape in times of aging populations and increased prevalence of cancer and chronic disease, routine adoption of FT-IR within clinical laboratories has remained elusive. Hence, this perspective shall outline the significant clinical potential of FT-IR diagnostics and subsequently address current barriers to translation from the perspective of all stakeholders, in the context of biofluid, histopathology, cytology, microbiology, and biomarker discovery frameworks. Thereafter, future perspectives of FT-IR for healthcare will be discussed, with consideration of recent technological advances that may facilitate future clinical translation.

Conformation change of α-synuclein(61－95) at the air-water interface and quantitative measurement of the tilt angle of the axis of its α-helix by multiple angle incidence resolution spectroscopy.

Various techniques have been developed to determine protein's structure to understand how proteins work.  Compared with X-ray crystallography requiring proteins to form single crystal structure and NMR which usually needs long time measurement, surface FT-IR techniques are able to quickly determine the tilt angle (the key information to determine whether the α-helix is transmembrane) of peptides/proteins in a monolayer at the interface (e.g. membranes). Specifically, for α-helical peptides/proteins in membrane, the tilt angle of the axis is one of the key information. In this paper, Multiple Angle Incidence Resolution Spectroscopy (MAIRS), a recently developed surface FTIR technique, was applied for the first time to quantitatively determine the tilt angle of the axis of α-helical model peptide related to α-synuclein (α-syn). α-Syn is a 140-amino-acid presynaptic protein whose aggregation is the hallmark of Parkinson's disease (PD). It is difficult for α-syn to form a single crystal structure and the primary structure of α-syn constitutes three domains: the N-terminus containing residues 1-60; the nonamyloid component (NAC) which spans residues 61-95 and is highly prone to aggregation; and C-terminus with residues 96-140. Here, the NAC part (i.e., α-syn(61-95)) responsible for the aggregation was found to change its unstructured conformation in aqueous solution to α-helix at the air-water interface by circular dichroism and MAIRS. In addition, the instinct power of MAIRS to quantitatively measure the tilt angle of the axis of α-helical α-syn(61-95) in monolayer was fully exhibited. Therefore, MAIRS is a potential supplemental technique to X-ray crystallography and NMR to determine the structure of membrane peptides/proteins.